Thanks for clearing that up, what a con!
My wife watched the MGB one and enjoyed it, as she has no interest in cars whatsoever i think that probably sums it up nicely...
Classic car show on Channel 5 Porsche 911
-
- Posts: 469
- Joined: Tue Feb 22, 2011 10:17 am
- Location: Harlow, the birthplace of fibreoptic communication, as the town sign says.
Re: Classic car show on Channel 5 Porsche 911
I wish I'd carried on watching the series now- it sounds like top entertainment
I have to admit I only watched the Jag one which was such a load of old cobblers I didn't bother to watch any more......... 


1968 Triumph Vitesse Mk1 2 litre convertible, Junior Miss rusty has a 1989 998cc Mk2 Metro, Mrs Rusty has a modern common rail diesel thing.
Re: Classic car show on Channel 5 Porsche 911
Its on catchup if you're desperate!
Re: Classic car show on Channel 5 Porsche 911
Ok - who's going to admit to watching the latest episode
They went to visit the amazing Steve Plunkett Cadillac Collection in Canada - have a look at how many cars he has here http://www.fleetwoodcountrycruizein.com ... ction.html
They are all in a purpose built building shown here
http://www.fleetwoodcountrycruizein.com ... salon.html
As for the car they restored, this had the usual comedy turns and swearing although there wasn't a walk out this time. How could they spend so much time on the paint work and then decide that it was the wrong colour. Were they smoke pellets up the exhaust or was it really burning that much transmission oil - must admit that I learnt something there about the vacuum switch. Was it just me or when they were stripping out the interior, the seats removed were different to the ones in the original car - they seemed to be similar to the two tone replacements yet the original wreck had plain seats - was this another case of buying two cars - and to 'find' a perfect front grille and bumper complete in very good condition at the bottom of a pile of junk - how long had that been there - 10 minutes?
Technical question from a beginner to the experts - they used a chemical paint stripper before sanding back the paint - is this better/quicker/easier - or what? Any thoughts as you still need to sand back to remove any residue?
Mike

They went to visit the amazing Steve Plunkett Cadillac Collection in Canada - have a look at how many cars he has here http://www.fleetwoodcountrycruizein.com ... ction.html
They are all in a purpose built building shown here
http://www.fleetwoodcountrycruizein.com ... salon.html
As for the car they restored, this had the usual comedy turns and swearing although there wasn't a walk out this time. How could they spend so much time on the paint work and then decide that it was the wrong colour. Were they smoke pellets up the exhaust or was it really burning that much transmission oil - must admit that I learnt something there about the vacuum switch. Was it just me or when they were stripping out the interior, the seats removed were different to the ones in the original car - they seemed to be similar to the two tone replacements yet the original wreck had plain seats - was this another case of buying two cars - and to 'find' a perfect front grille and bumper complete in very good condition at the bottom of a pile of junk - how long had that been there - 10 minutes?
Technical question from a beginner to the experts - they used a chemical paint stripper before sanding back the paint - is this better/quicker/easier - or what? Any thoughts as you still need to sand back to remove any residue?
Mike
-
- Posts: 120
- Joined: Sun Mar 13, 2011 2:49 pm
Re: Classic car show on Channel 5 Porsche 911
Hello chaps
The thing which really got me was how you can remove a webasto and sew in a piece of flat sheet steel using Mig and say that with a little filler it will be a lovely job. This would be a very skilled and time consuming job as the that metal is going to be 'a life on the ocean waves' as soon as the torch hits it. You couldnt fill it without tensioning the panel on the hammers first. And why would you use a Mig welder? Tig would do better as it allows some hammer welding as you go along.
And what would this cost?
Add to this a bare metal respray and the budget is gone.
And we all know that if the chassis was falling to bits ( even without cutting it off) then the shell is a goner.
The show seems to have the same story each week, the sums dont add up and the characters are silly. But none of this matters. What really matters is that this program shows nothing about car restoration. Which after all was meant to be its subject
The thing which really got me was how you can remove a webasto and sew in a piece of flat sheet steel using Mig and say that with a little filler it will be a lovely job. This would be a very skilled and time consuming job as the that metal is going to be 'a life on the ocean waves' as soon as the torch hits it. You couldnt fill it without tensioning the panel on the hammers first. And why would you use a Mig welder? Tig would do better as it allows some hammer welding as you go along.
And what would this cost?
Add to this a bare metal respray and the budget is gone.
And we all know that if the chassis was falling to bits ( even without cutting it off) then the shell is a goner.
The show seems to have the same story each week, the sums dont add up and the characters are silly. But none of this matters. What really matters is that this program shows nothing about car restoration. Which after all was meant to be its subject
Re: Classic car show on Channel 5 Porsche 911
No, it's not intended to be about restoration, at least not in an informative way. Bernie is a fairly well established slapstick comedian, the show is in the comedy/farce genre and its real raison d'être is to provide some interest in the channel's current trend toward giving away cars as prizes. If you doubt that this is comedy, just watch the mini edition when that comes on next week. It's the funniest thing ever, far funnier than the Mustang or the Cadillac and does show exactly how not to repair those scuttle to wing joins, floors and rear valance, which they show being welded on
in the show in spite of the fact that, until MK4, that's actually the only bolted on panel in a mini and made that way to ease rear subframe fitting.

J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..

-
- Posts: 55
- Joined: Fri Feb 25, 2011 3:17 pm
Re: Classic car show on Channel 5 Porsche 911
They're not selling them but offering them as prizes in their competition!
I stopped watching it after the usual stage managed "arguments" and although I know most of these programmes are scripted, this is by far the worst one. Have I entered to win any of their cars? NO!. Will I be entering any in the future? NO, will I be watching any more? NO - what a complete load of drivel.
I stopped watching it after the usual stage managed "arguments" and although I know most of these programmes are scripted, this is by far the worst one. Have I entered to win any of their cars? NO!. Will I be entering any in the future? NO, will I be watching any more? NO - what a complete load of drivel.
Re: Classic car show on Channel 5 Porsche 911
Who said they were selling the cars? 

J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..

Re: Classic car show on Channel 5 Porsche 911
That's because they used a second shell, I suppose a glaringly obvious sunroof on one and none on the second shell had to be cunningly disguised somehow!m.thaddeus wrote:Hello chaps
The thing which really got me was how you can remove a webasto and sew in a piece of flat sheet steel using Mig and say that with a little filler it will be a lovely job. This would be a very skilled and time consuming job as the that metal is going to be 'a life on the ocean waves' as soon as the torch hits it. You couldnt fill it without tensioning the panel on the hammers first. And why would you use a Mig welder? Tig would do better as it allows some hammer welding as you go along.
And what would this cost?
Add to this a bare metal respray and the budget is gone.
And we all know that if the chassis was falling to bits ( even without cutting it off) then the shell is a goner.
The show seems to have the same story each week, the sums dont add up and the characters are silly. But none of this matters. What really matters is that this program shows nothing about car restoration. Which after all was meant to be its subject
Quite why there has to be some major disaster in each episode is beyond me, Cadillac painted the wrong colour, a smashed modern screen with the Mustang, along with issues such as clouds of smoke billowing out the exhaust due to oil being sucked out the carb/faulty transmission valve etc etc it's like a pantomime farce. (I would say comedy farce, but I've not yet laughed at it!)
Re: Classic car show on Channel 5 Porsche 911
I'd be the first to admit that comedy usually works best when it's funny, but go on, admit it, the ground off rear springs falling out of the MG was quite amusing, in a shameful sort of way.
J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..
