Not "Welding for Dummies" book then?arceye wrote: But yeah, practice, practice, practice is the only real way to learn how to lay down weld that actually holds different pieces of metal together.
Incoming MIG welder query
Re: Incoming MIG welder query
"If you're driving on the edge ... you're leaving too much room!"
Retirement Project: '59 Austin A35 2-door with 1330cc Midget engine and many upgrades
Said goodbye: got '98 Alfa Romeo 156 2.0 TSpark to 210K miles before tin worm struck
Retirement Project: '59 Austin A35 2-door with 1330cc Midget engine and many upgrades
Said goodbye: got '98 Alfa Romeo 156 2.0 TSpark to 210K miles before tin worm struck
Re: Incoming MIG welder query
That seems to work for Binky's creators, or is their constant reference to the book a pink kipper?gazza82 wrote:...Not "Welding for Dummies" book then?
J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..
Re: Incoming MIG welder query
I've just lost ten minutes of my life looking at the amazon listing for that It doesn't actually look a bad book, sure it couldn't hurt anything but it does appear to American in origin so meh .
Available on Amazon Kindle or even in paperback
Available on Amazon Kindle or even in paperback
Re: Incoming MIG welder query
I went on a 20 week (2 nights a week) night class at the local tech college to learn to weld. Very informative and takes a lot of the guess work out of the welding process. My course had the choice of what type of welding you wanted to do, I plumped for mig as that was what I had and used at home.
Kev
Kev
- SirTainleyBarking
- Posts: 413
- Joined: Mon Feb 14, 2011 12:41 am
- Location: Solihull, where Landrovers come from
Re: Incoming MIG welder query
I don't get the practice I should, so when i start doing patching on the Landrover it starts off as looking like it was dropped by a flock of pigeons that had been fed weapons grade ex-lax.gazza82 wrote:Not "Welding for Dummies" book then?arceye wrote: But yeah, practice, practice, practice is the only real way to learn how to lay down weld that actually holds different pieces of metal together.
A few hours burning away and I can achieve "Adequate"
Landrovers and Welding go together like Bread and Butter. And in the wet they are about as structurally sound
Biting. It's like kissing except there's a winner
Biting. It's like kissing except there's a winner
-
- Posts: 469
- Joined: Tue Feb 22, 2011 10:17 am
- Location: Harlow, the birthplace of fibreoptic communication, as the town sign says.
Re: Incoming MIG welder query
The problem with welding at home isn't so much a matter of practice, which is always done under ideal conditions- clean new steel, standing up, lots of room, it's the circumstances many of us work in.....outdoors, on your back underneath or head inside a wheelarch, not really enough room, wind blowing, old metal, can't really see what's going on .....
I'm always impressed at how much better my welding is when I'm fabricating something on the bench than when I'm rolling in the gutter!
I'm always impressed at how much better my welding is when I'm fabricating something on the bench than when I'm rolling in the gutter!
1968 Triumph Vitesse Mk1 2 litre convertible, Junior Miss rusty has a 1989 998cc Mk2 Metro, Mrs Rusty has a modern common rail diesel thing.
Re: Incoming MIG welder query
Many, many years ago, I was a professional welder working for a company that made bespoke conveyor equipment. I became quite experienced with stick (manual arc), gas and tig welding, but never mig, as this had not then appeared at that company.
Some time later, I purchased a Clarke 120e mig welder (which is still going strong 18 years later), and set about teaching myself mig welding by replacing the sills on my wife's Mini 1000.
The 120e came with a small disposable gas bottle and regulator, but with no indication of how much gas the bottle contained. The blurb suggested that a bottle would allow around 45 mins welding, so I was rather surprised to discover that there was still a full bottle (by weight) after I had welded one sill. It was then that I realised that the regulator was faulty, and not releasing any gas! The welds were quite presentable though, but I did find it a lot easier with a correctly functioning regulator!
Some time later, I purchased a Clarke 120e mig welder (which is still going strong 18 years later), and set about teaching myself mig welding by replacing the sills on my wife's Mini 1000.
The 120e came with a small disposable gas bottle and regulator, but with no indication of how much gas the bottle contained. The blurb suggested that a bottle would allow around 45 mins welding, so I was rather surprised to discover that there was still a full bottle (by weight) after I had welded one sill. It was then that I realised that the regulator was faulty, and not releasing any gas! The welds were quite presentable though, but I did find it a lot easier with a correctly functioning regulator!
Re: Incoming MIG welder query
I have given that a lot of thought recently so tomorrow I'm going to rearrange the garage and change the aging single flouresent lights for double so at least I can see when I'm making a mess of my future welding.mr rusty wrote:The problem with welding at home isn't so much a matter of practice, which is always done under ideal conditions- clean new steel, standing up, lots of room, it's the circumstances many of us work in.....outdoors, on your back underneath or head inside a wheelarch, not really enough room, wind blowing, old metal, can't really see what's going on .....
I'm always impressed at how much better my welding is when I'm fabricating something on the bench than when I'm rolling in the gutter!
-
- Posts: 1399
- Joined: Mon Feb 21, 2011 11:22 am
- Location: Wigton, Cumbria
Re: Incoming MIG welder query
By strange coincidence, I'm going to change my strip lights for LED floodlights! I had a 500W QH lamp above the bench, but it blew two bulbs in rapid succession (partly because I made it swivel to be able to light the bench or either side of the garage and I don't think QH bulbs like being moved with a yard brush ), so I have bought a new LED one to replace it. I also have a smaller QH lamp over the garage door that has had a LED bulb fitted and it is great, so I have bought a new small LED floodlight to replace the strip light above the lathe - the opposite end to the doors. The portable floodlamp also has a LED bulb and is great as an inspection lamp - no heat from it to warm me up though.
I have to agree with SirT and Mr Rusty: my welding is dire if I haven't used the welder for a while. After an hour or two, it becomes acceptable (or even good if it's ground down and filled!!). Welding new metal is great, but it takes a master craftsman to be able to weld rust and, unfortunately, the tractors and Land Rover contain a lot of rust. I can almost do weld rust with gas, but the MIG is just too powerful!
I have to agree with SirT and Mr Rusty: my welding is dire if I haven't used the welder for a while. After an hour or two, it becomes acceptable (or even good if it's ground down and filled!!). Welding new metal is great, but it takes a master craftsman to be able to weld rust and, unfortunately, the tractors and Land Rover contain a lot of rust. I can almost do weld rust with gas, but the MIG is just too powerful!
-
- Posts: 96
- Joined: Mon Apr 06, 2015 10:31 am
Re: Incoming MIG welder query
In my case, I was taught welding in tea breaks, lunches etc by someone that could. His welding was way, way better than mine. Even so, I've decided to post an example of a bit of ally welding I did a couple of years ago. Going off topic a bit, as it is TIG-welded.
- Attachments
-
- rad.jpg (55.3 KiB) Viewed 2559 times
Who is online
Users browsing this forum: No registered users and 21 guests