August issue
August issue
I am not too sure about the Moggy "resto", it sounds like a cheapskate way of doing a resto, although the chap did all the safety parts body wise and mechanical.So it is a safe car, but it is nice to see a restored car looking like new again with all shiny body and wheels, although you may be afraid to get the car dirty.So the chap can use it like he stole her in the present condition..... .I think he should have changed to electronic ignition or at least put in a new set of points, condenser and leads in, but its his car and he can do what he likes, but if it was me I would at least give it some kind of a paint job anyway.
Re: August issue
With regard to the chap in the mag thats converting the MGA from LHD to RHD, how can you just unplug the switches and plug them back in to the RHD dash? Would they not be too short?
The way that was suggested to measure an engine's cylinder capacity is good, but how can you reach down to mark the welding rod at the base of the spark plug hole? Could you not just measure the depth of the hole, and then subtract this from a mark that you put at the top of the hole?
The way that was suggested to measure an engine's cylinder capacity is good, but how can you reach down to mark the welding rod at the base of the spark plug hole? Could you not just measure the depth of the hole, and then subtract this from a mark that you put at the top of the hole?
Re: August issue
Yes, you could, but what you want to know is the distance from any datum to the piston crown at BDC, the actual measurement being that from there to the crown at TDC. Doing it as you suggested you'd need four data marked on the rod which could become confusing. The datum can be any point on the thread as the piston travel is the measurement you're taking.Oldcarnut wrote:....how can you reach down to mark the welding rod at the base of the spark plug hole? Could you not just measure the depth of the hole, and then subtract this from a mark that you put at the top of the hole?
J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..
Re: August issue
ive had to abandon my subscription....
Re: August issue
Given most of the complaints I see are about subscriptions I'm surprised Bauer have any customers left.
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
Re: August issue
I saw the October edition when I was down south at the Metro Centre last Wednesday but didn't pick it up as I was sure that its appearance meant that my own copy would be waiting for me when I got home. Still waiting and good old Gillespie's haven't managed to get it to this side of the Wansbeck yet so I can't even pop through to Morpeth for a sneaky read in Smiths.
It's not just Bauer who cause problems with readers and their magazines arriving, some of their biggest distributors aren't consistent either.
The sooner it's possible to purchase, read and download the entire thing to a computer, the better!
It's not just Bauer who cause problems with readers and their magazines arriving, some of their biggest distributors aren't consistent either.
The sooner it's possible to purchase, read and download the entire thing to a computer, the better!
J
"Home is where you park it", so the saying goes. That may yet come true..
"Home is where you park it", so the saying goes. That may yet come true..
Re: August issue
i was very happy with the subscription service!! just a severe lack of cash after some very strange clients who seem to think its ok to make me wait for payment coupled with the bank managing to lose my salary for 2 weeks.. they even tried to charge me for going overdrawn!!!! didnt work though, i set the wife on them
Re: August issue
I picked up the October issue in Tesco earlier. I will read it when the other half goes out tonight (as I have been given a LONG list of jobs I need to do today).
Sorry to hear your problems are on-going rich, is there an equivalent to the small claims court in France?
Sorry to hear your problems are on-going rich, is there an equivalent to the small claims court in France?
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
Who is online
Users browsing this forum: No registered users and 81 guests