iveco

Got something to say, but it's not classic related? Here's the place to discuss. Also includes the once ever-so-popular word association thread... (although we've had to start from scratch with it - sorry!)
Post Reply
Message
Author
rich.
Posts: 6804
Joined: Wed Jan 05, 2011 9:18 pm

iveco

#1 Post by rich. » Sun Jan 27, 2013 1:18 pm

i sold my old iveco tipper as it needed a complete service loads of welding etc etc i was trying to register it over here but iveco france wanted €500 & then on top of this i needed to spend another €300 to get it registered..bit sad when it went but now looking for a cheap ford transit tipper :D

User avatar
TerryG
Posts: 6754
Joined: Wed Jan 05, 2011 1:54 pm
Location: East Midlands

Re: iveco

#2 Post by TerryG » Sun Jan 27, 2013 1:49 pm

Does that mean you have been rattling about on English plates for the last few years? tut tut! ;)
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.

User avatar
JPB
Posts: 10319
Joined: Fri Jan 07, 2011 3:24 pm

Re: iveco

#3 Post by JPB » Sun Jan 27, 2013 2:20 pm

TerryG wrote:Does that mean you have been rattling about on English plates for the last few years? tut tut! ;)
:lol:
The Secret Policeman's Other Ball wrote:And rememberrr to take some of zem wis yur.
J
"Home is where you park it", so the saying goes. That may yet come true.. :oops:

rich.
Posts: 6804
Joined: Wed Jan 05, 2011 9:18 pm

Re: iveco

#4 Post by rich. » Sun Jan 27, 2013 3:16 pm

JPB wrote:
TerryG wrote:Does that mean you have been rattling about on English plates for the last few years? tut tut! ;)
:lol:
The Secret Policeman's Other Ball wrote:And rememberrr to take some of zem wis yur.
at €500 for a peice of a4 paper too flippin right!

rich.
Posts: 6804
Joined: Wed Jan 05, 2011 9:18 pm

Re: iveco

#5 Post by rich. » Sun Jan 27, 2013 6:45 pm

just found a sprinter tipper for reasonable money, 90k miles 408D motor. any idea what the fuel consumption is chaps??

User avatar
TerryG
Posts: 6754
Joined: Wed Jan 05, 2011 1:54 pm
Location: East Midlands

Re: iveco

#6 Post by TerryG » Mon Jan 28, 2013 12:40 pm

Have you thought about building yourself a custom and making a K10 Pickup? ;)
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.

rich.
Posts: 6804
Joined: Wed Jan 05, 2011 9:18 pm

Re: iveco

#7 Post by rich. » Mon Jan 28, 2013 12:48 pm

not really, would you think it will carry between 3 & 5 ton on gravel/rubbish etc :D

User avatar
TerryG
Posts: 6754
Joined: Wed Jan 05, 2011 1:54 pm
Location: East Midlands

Re: iveco

#8 Post by TerryG » Mon Jan 28, 2013 1:08 pm

You could go double decker or make a trailer. You are always looking for problems rich ;)
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.

rich.
Posts: 6804
Joined: Wed Jan 05, 2011 9:18 pm

Re: iveco

#9 Post by rich. » Mon Jan 28, 2013 5:07 pm

its no problem terry, just over here modifcations which are not factory approved are difficult & expensive to pass. so bang goes my ferarri based micra...

User avatar
TerryG
Posts: 6754
Joined: Wed Jan 05, 2011 1:54 pm
Location: East Midlands

Re: iveco

#10 Post by TerryG » Mon Jan 28, 2013 5:59 pm

I thought you were planning to do it the other way round and have a micra based Ferrari.
French bureaucracy must be even worse than ours. Sometimes I think there is a conspiracy to stop us from tinkering.
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests