Here's the place to chat about all things classic. Also includes a feedback forum where you can communicate directly with the editorial team - don't hold back, they'd love to know what they're doing right (or wrong of course!)
-
mr rusty
- Posts: 469
- Joined: Tue Feb 22, 2011 10:17 am
- Location: Harlow, the birthplace of fibreoptic communication, as the town sign says.
#41
Post
by mr rusty » Sat Feb 04, 2012 6:27 pm
Made my vacuum gauge work! It's an old proops one that sits in the radio console with the oil pressure gauge but it's never been connected because I vcouldn't find the adaptor. The old electric oil pressure gauge packed up so a root in the loft to find a capilliary one that I knew was up there somewhere also turned up the vacuum gauge's adaptors.....screwed into the oil pressure gauge's adaptors for 'safe keeping'.......same thread
so I swapped over the oil pressure gauge and adaptor and looked for somewher to tap the vacuum gauge off from. There's a blanking bolt in the manifold for a servo take-off, I haven't got a servo and have no intention of fitting one so I drilled and tapped the blanking bolt, hooked up the gauge, and now it's finally doing something entertaining.
Then of course for test purposes it was absolutely essential to go for a top down spin...had the door windows up though
1968 Triumph Vitesse Mk1 2 litre convertible, Junior Miss rusty has a 1989 998cc Mk2 Metro, Mrs Rusty has a modern common rail diesel thing.
-
TerryG
- Posts: 6754
- Joined: Wed Jan 05, 2011 1:54 pm
- Location: East Midlands
#42
Post
by TerryG » Sat Feb 04, 2012 10:06 pm
I have just had to take my range to tow my mother-in-law out of the tesco carpark. it is amazing how many people are stuck and how many more morons there are with 4x4s still tearing about at 50!
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
-
MidgetSaab
- Posts: 165
- Joined: Sat Dec 03, 2011 5:15 pm
- Location: Toddington
#43
Post
by MidgetSaab » Sun Feb 05, 2012 7:47 pm
Left my wife's modern Merc on the drive where it belongs and had an enjoyable safe trip to the in-laws in the Saab, the 2nd best car in the snow I've owned, the best was a basic peugeot 205, soft long travel suspension and skinny tyres.
I may have to investigate the heater by pass valve soon though, the heater blows vaguely warm at best.
-
Paul240480
- Posts: 466
- Joined: Wed Jan 05, 2011 4:28 pm
- Location: Nivillac
-
Contact:
#44
Post
by Paul240480 » Sat Feb 11, 2012 3:56 pm
Replaced front 'flexis' and bled the whole brake system on the 850
-
MidgetSaab
- Posts: 165
- Joined: Sat Dec 03, 2011 5:15 pm
- Location: Toddington
#45
Post
by MidgetSaab » Sun Feb 12, 2012 4:52 pm
Washed the Saab, seems it's red after all.
-
MidgetSaab
- Posts: 165
- Joined: Sat Dec 03, 2011 5:15 pm
- Location: Toddington
#46
Post
by MidgetSaab » Sun Feb 12, 2012 4:54 pm
Oh and picked up a 6ft long fridge freezer, freezing journey home though as the boot wouldn't quite shut and had the window open to beat the fumes back.
-
Martin Evans
- Posts: 3274
- Joined: Fri Jan 14, 2011 10:16 am
- Location: South Wales.
-
Contact:
#47
Post
by Martin Evans » Sun Feb 12, 2012 5:22 pm
Well not to
my classic. Spent the day at my parents and decided to clean my mother's MGB GT. I noticed that another 1000 miles had come up, so I got out my father's grease gun and did the usual bits. That grease gun dates from 1953 and was first used on my grandfather's Riley RM; it's done quite a few nice cars over the years. If tools could talk
Rules exist for the obedience of fools and the guidance of wise men.
MG Midget 1500, MGB GT V8, Morris Minor Traveller 1275, MG Midget 1275 & too many bicycles.
-
TerryG
- Posts: 6754
- Joined: Wed Jan 05, 2011 1:54 pm
- Location: East Midlands
#48
Post
by TerryG » Sun Feb 12, 2012 9:28 pm
I changed my oil today, 3100 miles since last change. This time i have fitted an OEM oil filter so hopefully it will build pressure a bit quicker in the mornings!
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
-
Paul240480
- Posts: 466
- Joined: Wed Jan 05, 2011 4:28 pm
- Location: Nivillac
-
Contact:
#49
Post
by Paul240480 » Sat Feb 18, 2012 9:10 pm
I read my codes with my 5 quid homemade reader and got 1-1-1 . Woohoo
-
TerryG
- Posts: 6754
- Joined: Wed Jan 05, 2011 1:54 pm
- Location: East Midlands
#50
Post
by TerryG » Sat Feb 18, 2012 9:24 pm
I have just tried to change my dampers only to find that ALL the bolts are stuck. more annoyingly my grinder has a wire brush on it at the moment and i can't find the tool to change it so i went to B&Q in a huff and bought a dremel. Tomorrow i'll show those bolts who's boss!
Understeer: when you hit the wall with the front of the car.
Oversteer: when you hit the wall with the back of the car.
Horsepower: how fast you hit the wall.
Torque: how far you take the wall with you.
Who is online
Users browsing this forum: No registered users and 5 guests
